Finally deciding to save for lipo

[KawasakiDude572]

Well I did a ton of work on it today and I now think I am going to buy a losi micro rock crawler because winter is coming up

Sent from my DROID2 GLOBAL using Tapatalk

[XterraTrax]

Traxxas connectors are hard to solder correctly. To make it easier i would try using Deans connectors as your first soldering job.

[KawasakiDude572]

I asked someone at a rc day and he said you can buy the little "pigtails" with traxxas connectors

Sent from my DROID2 GLOBAL using Tapatalk

[KawasakiDude572]

[url=http://www.hobbypartz.com/73p-ac680-accharger.html]Thunder AC680 Professional Dual-Power LiPo Balance Charger/Discharger w/ AC Adapter for 1-6 Lipo/ 1-15 Nimh + USB to PC Software[/url] how many can this charge and is this a charger that plugs into the wall i saw someone using it at my rc fun day thingy and it looked like he just plugged it in does it come like that or do i have to get a power inverter

[url=http://www.hobbypartz.com/75p-t6-multi-charger.html]Thunder T6 Multi-LiPo Battery Charger (4X 6-Cell) Professional Balance Charger/DisCharger w/ LCD Display[/url] or is this one a better deal?

[JatoTheRipper]

[url=http://www.hobbypartz.com/73p-ac680-accharger.html]Thunder AC680 Professional Dual-Power LiPo Balance Charger/Discharger w/ AC Adapter for 1-6 Lipo/ 1-15 Nimh + USB to PC Software[/url] how many can this charge and is this a charger that plugs into the wall i saw someone using it at my rc fun day thingy and it looked like he just plugged it in does it come like that or do i have to get a power inverter

[url=http://www.hobbypartz.com/75p-t6-multi-charger.html]Thunder T6 Multi-LiPo Battery Charger (4X 6-Cell) Professional Balance Charger/DisCharger w/ LCD Display[/url] or is this one a better deal?

The AC680 plugs right into the wall. The T6 requires a separate power supply to plug into the wall.

Sent from my ADR6300 using Tapatalk

[KawasakiDude572]

And with the wall charger I can use those board thingys like on the video someone shared earlier in this thread and can I get one off of hobbypartz because I will get 2 2s and 1 3s if I do it but the 2s are 7.4v but I have a 8.4 nimh which one would be faster?

Sent from my DROID2 GLOBAL using Tapatalk

[JatoTheRipper]

And with the wall charger I can use those board thingys like on the video someone shared earlier in this thread and can I get one off of hobbypartz because I will get 2 2s and 1 3s if I do it but the 2s are 7.4v but I have a 8.4 nimh which one would be faster?

Sent from my DROID2 GLOBAL using Tapatalk

Do you mean the balancing board? Those are needed for LiPos only.

Try Gens Ace batteries from the same website as those chargers. They are the best bang for your buck when it comes to LiPos.

More volts will make your car faster, but the LiPo is a much better battery.

Sent from my ADR6300 using Tapatalk

[KawasakiDude572]

so would my 8.4 volt be faster and also its a board for paralell charging

[JatoTheRipper]

so would my 8.4 volt be faster and also its a board for paralell charging

I'm not familiarly with parallel charging so I can't help you there.

8.4 will be faster, but get LiPos. Don't waste your time on NiMH.

Sent from my ADR6300 using Tapatalk

[KawasakiDude572]

if my nimh is faster why would i wanna go lipo lmao xD