Results 1 to 3 of 3

Thread: New engine break-in procedure

  1. #1
    Member
    Join Date
    May 2011
    Location
    Winnipeg
    Posts
    35

    New engine break-in procedure

    Hey all,

    During a new engine break-in, are you required to do all the break-in during one session? Can I break it up over a couple of different days?

    Thanks
    Traxxas Slash 4x4 mostly stock with some big ass tires.
    Traxxas Stampede with a Velineon blushless system.
    Losi Highroller with a brushless system.
    Traxxas Revo 3.3

  2. #2
    Junior Member nitroroosta's Avatar
    Join Date
    Jul 2012
    Location
    Vero Beach,FL.
    Posts
    27
    As long as you get it up to about 200 degrees and put it away at bottom dead center you should have no problems, just baby that puppy til ya get about a gallon thru it or the piston will pop down to mid stroke on it's own centrifical arc with the glow plug out
    WRECKIN-N-WRENCHIN

  3. #3
    Member
    Join Date
    May 2011
    Location
    Winnipeg
    Posts
    35
    Thanks for your help. I picked up a new Dynamite Mach 2 .19 but I can't even get it to start. A few drops into the carb and it will fire up then quit. Gonna keep trying things.
    Traxxas Slash 4x4 mostly stock with some big ass tires.
    Traxxas Stampede with a Velineon blushless system.
    Losi Highroller with a brushless system.
    Traxxas Revo 3.3

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •