Large R/C car, truck, buggy, snowmobile, boat

[Trentwaskey]

Hello yall....I am very new to the whole rc deal and some may say this project is well beyond my skill level, and my reply is....to bad!!!!!!!!!!!!!!!!! Anyhow I bought a new drill and my old one i took apart, in case I found anything of intrest....and what do you no I found a 7. somthing volt (MASSIVE!!) motor. I was wondering what I could built with the monster motor... the specs are: what could I built with th@ and about what scale would it have to be...thx for any ideas...make em crazy!

Motor Specifications
Performance
Model M5-RS550-12
Operating v : 6v - 14.4v
Nominal v : 12v
No Load RPM : 19300
No Load A : 1.4A
Stall Torque : 68.85 oz-in 486.2 mN-m
Stall Current : 85A
Kt : 0.81 oz-in/A 5.7 mN-m/A
Kv : 1608 rpm/V
Efficiency : 70%
RPM - Peak Eff : 17000
Torque - Peak Eff : 8.84 oz-in 62.4 mN-m
Current - Peak Eff : 10.9A

Physical
Weight : 7.7 oz (218g)
Length - for motor : 2.24 in (57mm)
Diameter (with flux ring) : 1.52 in (38.5mm)
Diameter (no flux ring) : 1.41 in (35.8mm)
ShaftDiameter : 0.12 in (3.2mm)
Shaft Length : 0.3 in (7.6mm)
Mounting Screws (2) M3

[savager]

I dont know how fast the motor goes so you might want to check that out first

[Chris foster]

Some people have put them in the summit


Sent from my iPhone using Tapatalk

[rcman]

ya, 14.4 volt motors, good for huge 1/10 monster trucks or medium sized 1/8 scale monster trucks.