Mamba Monster esc issues.
Hello I just bought an E-Maxx brushless and it was fine for the first like four runs. Then I got it out the next day after running fine the day before and nothing would turn on. I took the motor off the esc and the esc turns on but it doesn't beep. It arms and everything but no sound. Then I connect the motor again and nothing will happen. Also without the motor connected when I press the throttle the receiver cuts in and out. So i hooked a rx pack and disconnected the red wire from the bec. The receiver is fine now but the system will still not come on while the motor is connected. Also when I have everything connected and i plug the batteries in the motor jumps like an eighth of a turn. Any ideas would be great I don't want to have to send it to castle. It is still under warranty and has never got wet so i don't know.