Hello, I have a Mamba Max Pro and I run it with the cm36 4600kv 4.5t motor, on 2 cell Li-Po my fan on the Mamba broke is it neccasary that i replace it? is it really needed for this setup?
Printable View
Hello, I have a Mamba Max Pro and I run it with the cm36 4600kv 4.5t motor, on 2 cell Li-Po my fan on the Mamba broke is it neccasary that i replace it? is it really needed for this setup?
Do a few runs without the fan then check the temps. If its over 160 then i would say you need the fan.
yeah get a new fan so you wont be sorry
If you replace the fan you won't have to worry about it over heating.
A Castle product specialist just told me it would be fine with no fan, the only reason they did the fan is because its a selling point to lots of people. It really isn't necessary.
I figured. I read somewhere that, while they don't recommend it, Castle stated the the mamba max pro and mamba monster are able to withstand operating temps of near 300 degrees Fahrenheit. Ive goten mine up to 190 a few times and never had any problems.Quote:
Originally Posted by Spektrum