motor problem

Does anyone know if a 17t stock brushed thundertiger motor would go good in a venom safari creeper or a axial scx10.

1. would it burn out?

2. would it have enough torqe to got threw the trails?

thanks...

1) yez it can. Why you Ask . Its a motor! They wear out! Or just burn out . There is no rhyme or reason.
2) Yes it will. Use between a 14 and 16 tooth pinion or u risk overheating the esc and motor.

just get a 20 turn motor from Dynamite rc cheap and has more torque and it has a internal fan to keep it cool

thanks....
whats the best set up for a safari creeper? ( motor, esc, tires,) for going threw the bush?

do you have it stock? i just looked at the specs and the stock setup is pretty nice. i guess if you want more with it you should run lipos on it if not already. tires you should get some new tires ill gve you a site on where to check for your own perference. and there is lots of sites for all your crawling needs ill put up a list. they are not links just copy and paste hope this was helpful
tcscrawlers.com
RCCrawler.com
CKRCcrawlers.com
RC4WD.com
RCrockcrawling.com
rcplanet.com