Results 1 to 4 of 4

Thread: Traxxas Rustler VXL Cvd's?

  1. #1
    Senior Member
    Join Date
    Mar 2012
    Posts
    292

    Traxxas Rustler VXL Cvd's?

    I had a question about MIP Cvd's for the Rustler. Here is the link of the Cvd's I'm looking at.
    http://www.amainhobbies.com/product_info.php/cPath/1_25_1466_735/products_id/141493/n/MIP-C-CVD-Kit

    Does anyone have any expierence with these cvd's? And would I need to know if those locknuts will act as wheel nuts later on.
    Thanks,
    -TraxxasAllOut

  2. #2
    Senior Member suburban_hooligan's Avatar
    Join Date
    Jun 2011
    Location
    So Cal
    Posts
    176
    if that's the same kit that was around back in the late 90's then yes i do have some experience with them. a guy i bashed with back then had me install a set on his rustler after the 12 turn motor he put in it kept causing driveline breakages. he never had an issue with them. much better than the stock setup was.

    and yes the lock nuts are wheel nuts. they hold the wheel on
    respect your elders. we've been around longer and done more stupid things than you, therefore we're smarter

  3. #3
    Senior Member rcman's Avatar
    Join Date
    Nov 2011
    Location
    Hartland, Wisconsin
    Posts
    832
    Get them. Ive never heard any bad things about their products.
    If nobody comes back from the future to stop you, how bad of a decision can it be?
    -Traxxas Rustler VXL
    -Axial SCX10 Jeep Wrangler
    -Helion Animus brushless

  4. #4
    Senior Member
    Join Date
    Mar 2012
    Posts
    292
    Ok. Thanks guys.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •