Results 1 to 8 of 8

Thread: Video Guide for ECX Torment

  1. #1
    ccccfam
    Guest

    Video Guide for ECX Torment

    I have seen a lot of questions come out about the Torment, so I decided to answer with a how to video step by step best as I can for you.

    This is part 1 of a series of videos I will do on the torment which will cover as much as I know.

    Hope this helps you, please I will be adding to this post as I go on.

    www.youtube.com/watch?v=m18E8AJDjxU

    part 2

    www.youtube.com/watch?v=0s3YZznTANw

    Part 3 VXL drive shaft upgrade

    http://www.youtube.com/watch?v=f_uPtpum_Bo
    Last edited by ccccfam; 01-23-2012 at 11:47 PM.

  2. #2
    ccccfam
    Guest
    ok I went and bought what I thought was best, hope it works for me. here is what I got

    http://www.hobbypartz.com/96m24-car-3650-3500.html
    3650 - 10T - 3500KV Motor 24.09

    http://www.hobbypartz.com/07e-c-xerun-80a-sd.html
    C-Xerun 80A ESC 64.70

    http://www.hobbypartz.com/07e-hobbyw...ogramcard.html
    LED Program Card 15

    total was 103.79 for the upgrade I hope it works, I will be posting a video of how the upgrade goes

  3. #3
    Senior Member
    Join Date
    Sep 2010
    Posts
    351
    nice work!!

  4. #4
    Senior Member
    Join Date
    Jan 2012
    Location
    Racine, WI.
    Posts
    141
    Nicely done man! A little constructive criticism though, watch your terminology you should have been saying you were removing the transmission not just motor, you said ECS instead of ESC a couple times and also said you were using a 8 cell battery when you took out a 7 cell. I in no way mean to be a jerk I am just making observations. I like the vids though and it was good to see as I am thinking about picking one of those up for my kid and I like the drive shaft mod a lot!!

  5. #5
    Senior Member
    Join Date
    Sep 2010
    Posts
    351
    yea a great first try though, and not a bad truck, we may have to get one for RCN just to check it out.

  6. #6
    ccccfam
    Guest
    Thanks for the info, I am just doing this to help more people get into the hobby, I think it is a great truck for beginners and I wanted to do a full timeline with as much detail as possible so that if somebody wanted to get it but feels a little intimidated that this video would make them feel confident. As I always say the more people at the track the better for all of us in the hobby.

  7. #7
    Senior Member
    Join Date
    May 2012
    Location
    holland, michigan
    Posts
    266
    nice job
    looked pretty good

  8. #8
    Junior Member The DC's Avatar
    Join Date
    Dec 2012
    Location
    Eastern TN
    Posts
    20
    Cool vids,I saved em to favorites for whenever I need to tear into mine. While there is a blow-up drawring of the truck as it disassembles included with the truck,not the easiest when you're in a hurry,tired,or not the most mechanically inclined (I have no problems with diagrams like those,but detailed assembly instructions should be included in every RTR,IMO-your videos take care of that issue for the Torment). Thanks for taking the time to do em

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •