Im new to RC devices and need help with a school project
The project is to use some kind of RC device to turn off a light switch without physically moving the light switch. Any help would be greatly appreciated!
I did this for the led kit on my SCX10... I used a micro servo plugged into the 3rd switch on my receiver... when I pushed the aux button on my DX3s the servo turned on the switch and when pushed again it switched it off. I also did this with another servo for the flat deck of my 6x6 so it will lift and lower to make it easier to pull on other rigs with the winch.
This is how I solved that issue, but if others have an idea I 2 would love to hear it