tired of blowing e-clips on your front toe block of your strike? i have the answer

[motakitty]

[IMG][/IMG]these are the stock shock shafts used as hindge pins with a nut at one end. i have since jb welded the nut in place since you dont need it to come off. it works great. no probloms since. you can even put another toe brace on the front if you wanted to. the shafts fit just like the stock hinge pins did, i didnt have to drill out the holes at all.

[scubaboy]

these cars are not that legit. sorry

[scubaboy]

looks like you are a pretty good basher, lots of scratches. try using pledge it helps you clean your car easily

[scubaboy]

at least try locktite or different thicker pins before doing that.

[motakitty]

This works great I've never had a problem since and you don't need e clips on both sides so it didn't affect anything else

[dizzyinzo]

at least try locktite or different thicker pins before doing that.

instead of making 3 different post you could have edited the first one and added the info in it

[motakitty]

That's what I was thinking too