Results 1 to 3 of 3

Thread: brushless scx10?

  1. #1
    Junior Member
    Join Date
    Mar 2012
    Posts
    1

    Smile brushless scx10?

    I am thinking of getting an scx10 and was wondering whether I should install a traxxas waterproof brushless system? I will probably keep the esc at half power and wanted to know if even that was too much speed? I am asking this because it says nowhere on the axial site it is waterproof. If it is I will use the stock setup with a traxxas waterproof receiver box. I do not trust my waterproofing skills.

  2. #2
    Junior Member
    Join Date
    Jun 2012
    Posts
    3
    i had a traxxas vxl3 combo in my dingo when i first built it,and had the power turned down and it was ok,but seemed to not have enough tourqe and withg the high cog seemed to roll alot.

  3. #3
    Senior Member
    Join Date
    Jan 2012
    Location
    Vancouver island BC Canada
    Posts
    144
    Your best bet is to find a small container that
    will fit your axial esc and your receiver in it. I have used the xl-5 esc in my scx10 but the drag brake sucks also with the reverse delay it does make it a pain to crawl around with. Try to stock with a Crawler set-up of some kind .... I prefer the goat system with a 55t motor

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •