Results 1 to 3 of 3

Thread: My Custom 6x6

  1. #1
    Senior Member rcman's Avatar
    Join Date
    Nov 2011
    Location
    Hartland, Wisconsin
    Posts
    843

    My Custom 6x6

    Ok, so this will NOT be a quick build by any means, but it should be awesome, at least for me. I started off by buying some 3/8" aluminum channel, 1/4" aluminum channel and some 1" flat bar aluminum. I also picked up some 8/32 threaded rod to make the links for this beast. This will be a slow build as I dont have a ton of money to go to RC. here are some pics of the progress so far.






    the frame itself will be 23.5 inches long. I am going to use the proline 1.9 xl super swampers


    The frame will be 3in wide which is close to a stock scx10 because I want to use scx10 axles.


    Here are the 4 chassis braces


    And here is all the progress I made last night after work.

    Please post as many comments or questions as you might have!!
    If nobody comes back from the future to stop you, how bad of a decision can it be?
    -Traxxas Rustler VXL
    -Axial SCX10 Jeep Wrangler

  2. #2
    Senior Member
    Join Date
    May 2012
    Posts
    361
    Awesome idea RCMan. I will be tuned in that's for sure.

    Sent from my MB886 using Tapatalk

  3. #3
    Senior Member rcman's Avatar
    Join Date
    Nov 2011
    Location
    Hartland, Wisconsin
    Posts
    843
    well, I ordered this a few days ago from RC4WD. The silver R2 transmission with disconnect, which means I will be able to select between 2wd and 4wd.



    If nobody comes back from the future to stop you, how bad of a decision can it be?
    -Traxxas Rustler VXL
    -Axial SCX10 Jeep Wrangler

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •