Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Selling Some 1/18 Scale gear and Some Electronics

  1. #11
    Senior Member ian2's Avatar
    Join Date
    Mar 2011
    Location
    michigan
    Posts
    209
    also will the truck come with radio and receiver?
    full throttle or else it must be broke but breaking it is just another reason to build it bigger and better than before!

  2. #12
    Senior Member
    Join Date
    Mar 2011
    Location
    Sussex, WI
    Posts
    70
    Ill try smushing everything into a smaller box, and I'll look for a nice size box at work tonight. I'll check it out.

    I used the mamba micro pro esc with the 5400 and 8000 motor from above. It hit 50 with the 8000, but I only used the 8000 for speed runs. 5400 is fun for if you get some rubber tires for sliding. I'll throw in the used esc and one of the motors for a total of $120 if you want. $140 if you want a receiver and remote. I hope you realize the roller is used pretty well and definitely not mint.
    Owner of:
    Slash 2WD VXL (58mph with a 6200kv motor)
    Slash 4x4 VXL (56mph with a 6200kv motor)

  3. #13
    Senior Member
    Join Date
    Mar 2011
    Location
    Sussex, WI
    Posts
    70
    Actually I'll do $150 for the whole setup and I'll feel better about letting it all go. Including shipping. Unless shipping rates are through the roof
    Last edited by ecardo; 05-07-2011 at 08:27 PM.
    Owner of:
    Slash 2WD VXL (58mph with a 6200kv motor)
    Slash 4x4 VXL (56mph with a 6200kv motor)

  4. #14
    Senior Member
    Join Date
    Mar 2011
    Location
    Sussex, WI
    Posts
    70


    Thats it set up.
    Owner of:
    Slash 2WD VXL (58mph with a 6200kv motor)
    Slash 4x4 VXL (56mph with a 6200kv motor)

  5. #15
    Senior Member ian2's Avatar
    Join Date
    Mar 2011
    Location
    michigan
    Posts
    209
    ill talk to my mom about it
    full throttle or else it must be broke but breaking it is just another reason to build it bigger and better than before!

  6. #16
    Senior Member
    Join Date
    Mar 2011
    Location
    Sussex, WI
    Posts
    70
    Did you ask?

    $40 for the Chassis with Servo and extra parts
    $30 for the receiver and radio
    $80 for the esc and motor
    $150 Total.

    Plus of course the body with pins.
    Owner of:
    Slash 2WD VXL (58mph with a 6200kv motor)
    Slash 4x4 VXL (56mph with a 6200kv motor)

  7. #17
    Senior Member ian2's Avatar
    Join Date
    Mar 2011
    Location
    michigan
    Posts
    209
    it will be like a month :/ i just spent like 100 dollars on my dirtbike and so i just need to save up some money first loll
    full throttle or else it must be broke but breaking it is just another reason to build it bigger and better than before!

  8. #18
    Senior Member
    Join Date
    Mar 2011
    Location
    Sussex, WI
    Posts
    70
    $130 for everything?
    Owner of:
    Slash 2WD VXL (58mph with a 6200kv motor)
    Slash 4x4 VXL (56mph with a 6200kv motor)

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Selling Savage 2350
    By MrGidi123 in forum RCN Marketplace
    Replies: 4
    Last Post: 08-21-2011, 02:41 PM
  2. Selling my HPI Trophy 3.5
    By MrGidi123 in forum RCN Marketplace
    Replies: 0
    Last Post: 07-15-2011, 07:21 PM
  3. RC Nightmare Selling Mad Kits!
    By jeremy in forum Announcements
    Replies: 13
    Last Post: 07-05-2011, 05:55 PM
  4. Selling Revo 3.3!!! GREAT AUCTION!
    By crazybearrc in forum RCN Marketplace
    Replies: 3
    Last Post: 07-01-2011, 12:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •