Selling Some 1/18 Scale gear and Some Electronics

[ecardo]

I tried selling some stuff on eBay, but people never actually bid on the stuff even though I had 10+ watchers per item.

New Mamba Micro Pro (never used and has no connector soldered on yet): $60

Used Mamba Micro Pro w/ deans connector soldered on: $50

Used Mamba Brushless 1/18 motor with 5400kv: $40

Used Mamba Brushless 1/18 Motor with 8000kv: $40

*I will not go much lower than what I'm asking here. If I can't sell any of these for a good deal I'd rather keep them since I put a lot of money into them.




* However, I will gladly listen to any kind of offer for the things below.

Heavily used and upgraded Mini T Roller: $40
- comes with a handful of spare parts and new wheels with the old ones. It also comes with everything that came with it in the box when I first bought it except for the electronics
- it has a 3 wire servo installed in it. The original had a 4 wire which only worked with the original esc/receiver combo

Two Losi 7.2V 1100mAh NiMH Mini Packs: $30 for both (they have deans on)
- less than 10 charges each. $30 each in the store

Three of the mini batteries from the Mini Erevo: $20 for all three
- my dual peak charger (10 years old) didn't charge these very well. Then I used the wall charger and they worked using the wall charger. They aren't worth charging for a couple days to get 10min of run time using two of them. If you have a nice charger that works take em. They have a bit of runs through them I think. They came with something off eBay.

Venom 2s 7.4V 4000mah LiPo Battery: $30
- Has less than 10 charges through it. I'm a bit iffy on this one because I might use it on my future Spartan for a 5s combo


I will listen to any offers so make me one!


Oh, and it's not really RC but I'll trade or sell an 8gb iPod touch for $130

[dizzyinzo]

i know some one that might take that MmP off ur hands

[ecardo]

Sweet, if he/she is interested for sure send em a link! Otherwise I can email if he/she isn't on this forum.

[ecardo]

I updated this so take a look!

[KawasakiDude572]

omfg i wanna buy your lipo so bad but i dont have the money for lipos or the charger

[ian2]

what connector is on that lipo im interested in the micro t roller post up some pics im interested in buyiing any minis if anyone is selling them?

[ecardo]

I increased the price of the LiPo because I'm not sure if I'm keeping it or not yet for a Spartan. I will know for sure after I decide if I should go straight to 6s or stay at 5s to run a little bit cooler. It's a traxxas connector, and it's a MINI T not a MICRO T

Here is the link to the eBay page I have it on. I forgot to mention but a new motor plate would probably be needed. $10 tops for a nice one. The page also has a better description. It's pretty scratched and chipped but nothing bad or anything that would hinder it's driving

[url=http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150602268458&ssPageNam e=STRK:MESELX:IT#ht_500wt_922]Upgraded Losi Mini T Roller with extras - eBay (item 150602268458 end time May-17-11 08:38:02 PDT)[/url]

[ian2]

would you do 40 with shipping?

[ecardo]

For all the mini t stuff? Shipping this could get a little pricy so I'll do $50 including shipping

[ian2]

could you do 45$ i just live in michigan it cant be that much? but what motor and esc did you run in it when you had a motor in it