speed slash

i have never actually dont a project before. i have a slash 2wd taking up space in my room. and i am going to turn it into a top speed demon. not looking for 100mph but really fast.

[url=http://www.hobbypartz.com/96m214-3674-2800kv-6t.html]Tacon 3674-540XL-6T Brushless Motor 2800KV for 1/8 Car Buggy Trucks EDF Motor[/url] motor a 3s lipo (gens ace (nothing else)) but as far as the esc
[url=http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=16149]HobbyKing Online R/C Hobby Store : Scanner RC 150A ESC (1/10Scale)[/url]

the thing will haul. i plan on doing this after i get my buggy squared away

Do it. As long as you don't do any jumps that motor should do fine.

sounds sick, make a video of you building it and of its maiden run!

idk on the tires ill run. the stock ones blew apart on me.

Get some 17mm hex adapters and try these.

[url=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXZHV2&P=FR]TowerHobbies.com | THSC7040-D THS Racing C7040 1/8 Car 40 Shore Foam Tires Dish Rim[/url]

those are a little pricey. thinking of the street fighters

are you gonna try and race it

na just speed runs

oh ok. If you were gonna race it I was gonna tell you to go with castle creations because all of there motors are 4 pole motors therefore they are quicker

the street fighters are sick tires i have them and running it back and forth after 10 mins the tires heat up and get super sticks and hold to the road soo well its unbelievable defiantly recommend the street fighters