awesome and is this going to be the final product
Printable View
awesome and is this going to be the final product
On the losi body, yeah
I'm gonna do the lexan panels on the steel cage later on
The graphics are all paint
With a little help from a Parma Inca paint mask
Rear section are painted and mounted
http://i190.photobucket.com/albums/z...B/DSCN2302.jpg
http://i190.photobucket.com/albums/z...B/DSCN2303.jpg
Next I need to mount the front bumper and fab a rear bumper/bracket
and improve the steering with the Slash 4x4 bell crank
just jawdropping very nice paint job
Thanks Mate
Well I was out testing my onboard camera (works great)
But I ripped the front wheel of at the hub ...........
The epoxy resin should be dry now
http://i190.photobucket.com/albums/z...B/DSCN2305.jpg
Trimmed and mounted
http://i190.photobucket.com/albums/z...B/DSCN2311.jpg
And I installed the Slash 4x4 steering
http://i190.photobucket.com/albums/z...B/DSCN2312.jpg
i think you should hop up to aluminum parts for the front hubs
Yeah I had the same thought when that front wheel sheared offQuote:
Originally Posted by rcbeginner
Well either that or a beefier milled nylon hub
The hub I have on now is from Pro-Line and it broke at the mold line, the plastic feels allot softer than the Traxxas and even softer than RPM plastic
I want inline front hub and the Pro-Line xxx-scb and SC10 conversion is the only one I found