Results 1 to 6 of 6

Thread: Mip Ball diff help

  1. #1
    Milk
    Guest

    Mip Ball diff help

    I need some help put a new mip diff in my sc10 and ran fine for a while then I tightened it some more now the slipper clutch is slipping would help please

  2. #2
    Member motakitty's Avatar
    Join Date
    Oct 2010
    Location
    bay area
    Posts
    66
    i beleive you have to readjust your slipper clutch since you added more stress to the slipper by making the diff tighter so now it takes more power to turn both wheels instead of one.and that puts an extra load on the spur so you have to compensate

  3. #3
    Milk
    Guest
    Thanks for the help but it didn't work cuz I had already burned out my diff

  4. #4
    scubaboy
    Guest
    is it factory team? many differences

  5. #5
    scubaboy
    Guest
    also the v2 slipper is easiy ajusted.

  6. #6
    Senior Member rcbeginner's Avatar
    Join Date
    Oct 2010
    Location
    San Bernardino Ca
    Posts
    451
    did you seat the parts before the first run? and when you built it did you checked it so that it did not slip by hand?

Similar Threads

  1. is the center diff half full?
    By batman in forum Traxxas Short Course Trucks
    Replies: 5
    Last Post: 09-01-2011, 09:26 PM
  2. Tamiya TB-02 diff.
    By andersonwal in forum RC Drifting
    Replies: 0
    Last Post: 05-11-2011, 06:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •