SC10 track setups
so, i run on a very hard, very high grip indoor track. ok, its carpet.lol.
running an SC10 with RPM arms, and Jconcepts Goosebumps. I have too much body roll. I've seen some setups running heavy shock oil up front, and lighter oil out back. My problem is I'm running the heavy Titan brushed motor out back. I'm thinking 40 wt oil the way around, but wanted to get some opinions. Any opinions on spring choices?
Don't have one, but this link might help or atleast you can see how others are setting up their SC10s
[url=http://www.teamassociated.com/setupsheets/SC10/]SC10: Team Associated - Champions By Design - Nitro and Electric RC Cars[/url]
get the BIZZARE Sway Bars, they should have some for it
My SC10 for the in-door carpet track here is set up with
reedy 3300kv brushless kit
45wt in the rear along with the green springs and 1cm spacer
50wt in the front with the gold springs and 1/2cm spacer
sliver sway bar
seems to work really well I held the fastest lap times the other night, well until I had a brief meeting with the barriers and shattered the front end of my truck. It really depends on how hard your going to run into the corners. 1 guy we had there the other night ran 60wt in the rear and 45wt in the front, seemed to work for him. I guess he liked that his truck nose dived then hard on the throttle to swing the rear for the hair pins, didn't work to well on the sweeper corners tho
i run red in front and silver in back. it works really good
that was even helpful to me and i race. thank you!