Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: What motor esc combo fits in stampede

  1. #1
    Member Chris foster's Avatar
    Join Date
    Sep 2012
    Posts
    40

    What motor esc combo fits in stampede

    Hi this is my first post I want some thing that can handle more than 3 cells but bolts right in with no mods is it anything out there like that that's not super expensive this is what my truck is Attachment 5633.8 roadrages gets the motor too hot so I took off and did this ImageUploadedByTapatalk1348961738.857878.jpg here are the part that came in today still waiting on 2 more shipments ImageUploadedByTapatalk1348961813.671101.jpgImageUploadedByTapatalk1348961828.157504.jpgImageUploadedByTapatalk1348961842.122981.jpgImageUploadedByTapatalk1348961862.078707.jpgyou can see by the stuff I buy I'm not made of money I was Hoping to get a big Ezrun combo for 1/8 scale anyone know of one that will fit the magnum tranny my ext flm chassis is in the mail
    Feed the pede

  2. #2
    Senior Member
    Join Date
    May 2012
    Posts
    354
    Is that the aluminum flm chassis?

    Sent from my MB860 using Tapatalk 2

  3. #3
    Member Chris foster's Avatar
    Join Date
    Sep 2012
    Posts
    40
    Yeah got it in blue and the chassis braces along with some other parts
    Feed the pede

  4. #4
    Member Chris foster's Avatar
    Join Date
    Sep 2012
    Posts
    40
    I don't have a lipo because the local hobby shop wants 130$ for the same thing I seen online for less than half of that but they don't ship lipos to Alaska anymore but I got this from cheap battery's . Com and it gets the job done I went 41mph with 16/86 gearsand the run time is excellent but man it's heavy it's elite cells 5000 mah 10.8 volts how much faster do you think a 3 cell would be
    Feed the pede

  5. #5
    Senior Member rcman's Avatar
    Join Date
    Nov 2011
    Location
    Hartland, Wisconsin
    Posts
    832
    Good choice on the rpm parts, the remote and reciever, and the piggyback shocks, however the Integy shocks are know as s*** cause they will bend and break over the slightest of jumps. So I would say get the blue traxxas aluminum link set.
    And tires wise, check out ProLineracing.com, they have LOTS of different tires for onroad, offroad, and racing.
    Last edited by rcman; 09-30-2012 at 01:54 AM.
    If nobody comes back from the future to stop you, how bad of a decision can it be?
    -Traxxas Rustler VXL
    -Axial SCX10 Jeep Wrangler
    -Helion Animus brushless

  6. #6
    Member Chris foster's Avatar
    Join Date
    Sep 2012
    Posts
    40
    Sorry it not the flm chassis it's the rem chassis and braces and shock towers I was checking them both out but went with rem because it comes in different colors might be a dumb reason but the look pretty equal to me and the ext rem I believe is a half inch longer compared to the flm ext
    Feed the pede

  7. #7
    Senior Member
    Join Date
    May 2012
    Posts
    354
    Man i dont know. I got 41mph a couple days ago and that was eith a castle 2400kv with 4s 5000mah turnigy lipo. I am pretty sure thats because i ran out of street though. That is in my 2x4 stampede. How fast are you looking to go?

    Sent from my MB860 using Tapatalk 2

  8. #8
    Senior Member
    Join Date
    May 2012
    Posts
    354
    Like rcman said proline has some great tires. I run the 2.8 trenchers

    Sent from my MB860 using Tapatalk 2

  9. #9
    Member Chris foster's Avatar
    Join Date
    Sep 2012
    Posts
    40
    Well now I don't feel so bad about 41mph any more but if the vxl can do 60 I want to do 60
    Feed the pede

  10. #10
    Senior Member
    Join Date
    May 2012
    Posts
    354
    Dude i was looking at the same thing last nite. The whole kit would be sweet. My purchase now trigger finger was twitching bad.lol



    Sent from my MB860 using Tapatalk 2

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •