Printable View
So i got my first slash as a roller and i put a brushed 14t motor in it.My question is should my dynamite tazer 12t esc handle it?I ran it and the esc was pretty hot and the battery was hot enough to melt the black coating on it a bit, its a venom 5000 mah nimh.
Try reducing your gearing, the esc can handle it but the slash may be a bit heavy for a 14t motor without gearing down some. I would definitly upgrade to brushless when possible especially with a heavy vehicle like the slash.
Ok i'm currently running a 23 tooth pinon.I have a spare 19 tooth pinion i beleive.Money is an issue right now so i'm just trying to get by for now.Quote:
Originally Posted by andersonwal
if moneys and issue i would check out the tacon motor and the turnigy 100amp esc you could go brushless for about 85$
thanks that sounds good.Quote:
Originally Posted by dizzyinzo
that 23 is definitly way to big to be running right now unless your doing speed runs, the 19 tooth will be alot better and you should notice the car has more acceleration. also castle has thier sidewinder sct system that ive heard you can find at some places at anywhere between 90-100 bucks. I have one in my slash and it is a HUGE power boost over a brushed motor. It is definitly worth the money. If you get it, get the castle link or the field programer card also, it is a PITA to try to program the speed control using the throttle beeps.
What would be a good battery to use with the castle system?Quote:
Originally Posted by andersonwal
at least a 5000 mah nihm battery or atleast a 2s lipo battery. I use the Gens Ace 5000mah 40c battery, 36 dollars on hobbypartz.com
I'm wanting to use lipo but i gotta get a charger, thanks for the help.Quote:
Originally Posted by andersonwal
you might need to check your gearing
and it can handle the motor