I use a hose. And dry it with a air compressor
I am just about to get a Slash 4x4 Ultimate and I'm gonna be running it in the snow, mud, and water. I was wondering if there was anyway to clean and dry it easily( because i am obviously a n00b). Like a hair dryer or something. Thans for the help!
I use a hose. And dry it with a air compressor
i rinse my car off with a hose and then I use a hairdryer to dry it off cause even the tiniest bit of water can rust a screw and rusty screws dont look to good.
Rustler VXL with $754.10 worth of upgrades (and more to come)
Helion 1/18 animus 18sc with custom LED headlights & taillights and a 4050kv 4pole brushless motor
Kyosho Jet Stream 800 needing esc
Use ultimatercnetwork's video. Just search on YouTube ultimatercnetwork clean and you'll find it.
ya jang's got a lot of great tutorials
Rustler VXL with $754.10 worth of upgrades (and more to come)
Helion 1/18 animus 18sc with custom LED headlights & taillights and a 4050kv 4pole brushless motor
Kyosho Jet Stream 800 needing esc
you can wash it off with a sink or hose to get the mud off and they air dry it with either a blow dryer or a air compresser
I would lightly spray it down afterwards with some wd-40 or something similar. Then wipe the whole thing down to remove the bulk of the spray. I know it will collect dust more easily but who cares, you will probably be cleaning it again with the hose after more mud and snow bashing. It also shines a lot after wd-40. Later
Sent from my iPad using Tapatalk HD
Wd40 the car after you clean is so the nxt cleaning will be much easier. Always blow all excess w compressed air!
Slash 4x4 MM BulletProofed!
Emaxx MM Full Integy 4show
Tmaxx for bashing